Skip to content

Cookies

We use our own cookies to make the site work and, if you allow it, analytics and advertising ones (Google Analytics, Google Ads and PostHog) to learn what to improve and measure our ads. You can change this at any time. Cookie policy

Rajputana Customs' KTM 390 Duke cafe racer: the Duke without the edges

From Jaipur, India, Rajputana Customs turns a 2015 KTM 390 Duke into a cafe racer with hand-made steel bodywork, twin BMW GS projectors, Bonneville spoked wheels and a metallic finish with gold details.

4 min readAlso in:EspañolDeutschFrançaisItalianoPortuguês
Rajputana Customs' KTM 390 Duke cafe racer in profile: metallic tank, steel tail, gold fork, spoked wheels and slicks
Three-quarter view of Rajputana's KTM 390 Duke with the front nose, exposed subframe and wrapped exhaust header
Hand-made steel nose with twin vents, clip-ons, Brembo master cylinder and one of the projector lights beside the frame
Close-up of the black exhaust tip with a gold ring on Rajputana Customs' KTM 390 Duke
3201 / 4

The KTM 390 Duke is sharp in every sense: light, eager and covered in angles. At Rajputana Customs, Vijay Singh's workshop in Jaipur, India, they decided to take the edges off and turn it into a cafe racer with rounded lines, hand-made steel bodywork, spoked wheels and two headlights you would never expect on an Austrian naked bike.

Three-quarter view of Rajputana's KTM 390 Duke with the front nose, exposed subframe and wrapped exhaust header

A Jaipur workshop known for metalwork

Rajputana Customs is one of India's best-known workshops, famous for shaping metal by hand. This bike was a commission from a private client who wanted something very different from a stock Duke, a bike that has sold very well in India thanks to its value for money. Bike EXIF first featured it in 2021 and has now brought it back in its throwback section.

The base: a 2015 KTM 390 Duke

The starting point is a 2015 390 Duke, with the 373 cc single making around 43 hp that is also found in the Husqvarna Vitpilen 401. It is a lively engine in a light bike, and Rajputana left it untouched inside, along with the suspension: the work focused on the frame, the bodywork and the details.

What they changed

  • Subframe: a new one in mild steel tube, first designed with a wireframe model and fitted with CNC-machined mounts instead of the stock ones.
  • Bodywork: tank, tail and a small nose fairing hand-made from low-carbon steel sheet. The tank takes its cues from the 2007 Yamaha YZF-R1.
  • Headlights: two BMW GS projectors, one on each side of the tank, instead of the Duke's single headlight.
  • Instruments: the stock KTM dash has moved to the top of the tank to clear the bars.
  • Controls: custom clip-ons and a Brembo radial master cylinder.
  • Wheels: spoked rims from a Triumph Bonneville with aluminium hubs machined in-house, replacing the 17-inch alloys.
  • Tyres: Pirelli Diablo Supercorsa SC slicks, 140 front and 190 rear.
  • Exhaust: a straight-through system to help the engine breathe.
  • Tail light: LEDs set into a sliced piece of acrylic.
  • Finish: a subtle metallic paint with gold details on the hardware, plus Snake Skins tank pads for knee grip.
Hand-made steel nose with twin vents, clip-ons, Brembo master cylinder and one of the projector lights beside the frame

Spec sheet

Donor bikeKTM 390 Duke (2015), 373 cc single, around 43 hp
BuilderRajputana Customs, Vijay Singh (Jaipur, India)
FrameNew steel-tube subframe with CNC mounts
BodyworkHand-made steel tank, tail and nose fairing
HeadlightsTwo BMW GS projectors
WheelsTriumph Bonneville spokes with custom aluminium hubs
TyresPirelli Diablo Supercorsa SC 140 / 190
BrakesStock discs and calipers, Brembo radial master cylinder
ExhaustStraight-through
PhotosSalman Aarif
Close-up of the black exhaust tip with a gold ring on Rajputana Customs' KTM 390 Duke

What we like and what makes us wonder

We like that it is not the usual cafe racer built on a classic: taking a modern naked and giving it soft shapes is harder than it looks, and the hand-made metalwork shows. The twin GS projectors beside the tank give it a very recognisable face, and moving the dash to the tank leaves a remarkably clean cockpit.

The doubts: spoked wheels and a 190 rear slick on a 43 hp bike are more about looks than need, and slicks are not for the road. For everyday riding it would need road-legal tyres and a careful check of the weight and balance of the new wheels.

And in Spain? What would need approval

If you wanted to build something similar on a Duke registered in Spain, these are the changes that usually need paperwork at the ITV (the Spanish roadworthiness test), always depending on the case and the bike's technical card:

  • Subframe: a new custom one affects the structure and the seating capacity on the card.
  • Headlight: swapping the single headlight for two projectors from another bike.
  • Wheels and tyres: rims from another bike and different sizes; slicks are not legal on public roads.
  • Handlebar: the clip-ons and the new master cylinder.
  • Exhaust: a straight-through system must meet noise and emissions limits.
  • Indicators and lights: the LED tail light must be approved and correctly placed.

This is guidance only and does not replace the judgement of the ITV station. See how getting modifications approved works or tell us about your bike. If you like KTMs, have a look at the KTM 450 SRM by Vitium Moto.

Source and credits

Bike built by Rajputana Customs (Vijay Singh). Photos: Salman Aarif. The story was originally published by Bike EXIF. This article is our own summary and commentary.

TagsKTM390 DukeCafe racerRajputana CustomsIndia

Keep browsing the garage

All builds →
Could it be homologated?Tell us your case
Ask